Select Vehicle

Auto Part Auto Part Auto Part

Rexing HD18®

  • Product Details
Auto Part

$ The dash cam dual lens installed, the front one and the rear one(WATERPROOF), which are used to record much more information back and front. To ensure your backing up to be quick but safe, the dashboard camera will alternate to the view of the rear camera and play on the screen. The dash cams for vehicles is humanized designed to release the manual operation which can start or cease video recording automatically with the cars starting up or flame out. Having passed various rigid tests, REXING HD18 ensures the long-term and steady operation of the car camcorder and guards against shut down caused by some minor faults. Using large-aperture lens and 160-degree oversized wide angle, REXING HD18 is able to record more driving information and misses not a bit of important accident details. With high-ranking main control chip, image sensor and also glass lens of 6 layers employed in car dash camera, night video quality is much better. With smaller body size and suction mount, REXING HD18 wont block the sight of drivers and will make your driving more secured. The rear camera of dashboard cam has a view of 90 degree wide angle, 4 meters wire for car charger and 6 meters wire for rear camera which are long enough to simplify the installation, to conceal the overlong part to make it more pleasing to the eye. Designed in compact form factor the HD18 vehicle camera utilizes Continuous Loop Recording, which automatically overwrites the oldest footage when the memory card gets full. It also features a motion sensor for automatic recording while driving, as well as a G-Sensor, which senses sudden acceleration and collisions to automatically capture and protect critical footage surrounding an accident. Equipped with 3.0-inch HD LCD screen with as high as 960*240 resolution ratio, REXING HD18 is able to play the video recorded by the car camera on the accident spot, convenient for on-site evidence presentation.Features:* The dash cam dual lens installed record much more information back and front* Enhance video quality at night and helps in capturing minor details not normally seen at night* Start/Stop recording automatically after turning on/off the ignition* Seamless video loop recording to ensure None Stop recording in a single memory card* Accident Auto Detection Feature (G-Sensor) can locks data to memory* Press Emergency Lock button to save and lock present video in recording mode* Front camera 720P, rear camera 480PSpecifications:* Video Resolution: 720P/480P* Unlimited Cycle Recording: Support* Viewing Angle: 160/90 degree* Memory Card: 8G~32G Micro SD/TF Card(Class 10)* Video Format: AVI* Photo Format: JPGE* Display Size: 3.0 inches LCD* Audio Recording: Support* G-sensor: Support* USB: Support* Battery: 120mAh* Speaker: Built in* Input Voltage: DC 5V* Language: English* Operating System: Windows 2000/XP/Vista 32/7 and above* Operating Temperature: 10 F to 140 FPackage Includes:1 * REXING HD18 Dash Camera1 * Mount Kits1 * Car Charger1 * USB Data Cable1 * User ManualDoes the dashboard camera have a built-in battery? For safety concern, battery is low capacity to save files in emergency. To use the dash cam, please always connect it to car charger. Our battery is the current most advanced and it passed strict lab tests in extreme high/low temperature.***All International orders are subject to customs fees***


Exhaust System Type: Cat-Back

Exhaust Tubing Material: 304 SS

Exit Location Split Rear

Tubing Diameter 2.5'

Exhaust System Sound: Moderate

Finish: Carbon Fibre

Muffler Quantity: 4

Tip Quantity: 4

Tip Material: Stainless Steel

Tip Type: Double Wall

Tip Outlet Diameter: 4.5"

Tip Shape: Round

Tip Attachment Style: Clamp On

Horsepower Gain: +20 HP

Torque Max Gains: +19 lb x ft.

Resonator Diameter: 4"

Resonator Length: 15"

  • • Increases horsepower and torque
  • • Improves performance
  • • Flow bench and dyno tested
  • • Stainless steel construction
  • • Tubes mandrel bent
  • • Uses factory hanger locations
  • • Comes with high quality band clamps and everything needed for installation
  • • Backed by a 2-year limited warranty • Proudly made in the USA

A great aftermarket exhaust system must provide more horsepower and torque for performance gains, have a powerful sound, and be constructed so it's durable and installs with a minimum of hassle. This Takeda Exhaust System delivers on all counts. This system was extensively flow bench and dyno tested to extract the most horsepower and torque and to ensure the perfect decibel level without compromising performance.

This unique transverse exhaust system is completely constructed from durable, long lasting stainless steel. The free-flowing stainless steel muffler is designed to unleash all available horsepower and torque while producing a powerful sound, with no annoying drone in the cabin. The stainless steel exhaust tubes are mandrel bent to ensure smooth bends and to make sure the pipe maintains its size and shape throughout the entire length. Tubes that aren't mandrel bent can lose a percentage of their diameter in sharp bends, creating restriction and reducing exhaust flow. As the perfect finishing touch, this exhaust system sports dual oval double-wall 304 polished stainless steel exhaust tips.

To ensure a hassle-free installation, this exhaust system utilizes all of the factory mounting locations. High quality band clamps are included for a complete 360-degree sealing surface. This system is backed by a 2-year limited warranty and it's engineered and manufactured in the USA.

TAKEDA® is a division of Advanced Flow Engineering (aFe) Inc. Headquartered in Corona, California, the company was launched in 2009 to specialize in the development, design and manufacture of performance products for sport compact cars. Today, Takeda is most well-known for its line of performance air intake systems. These systems are flow bench and dyno tested for optimal performance, and feature mandrel-bent aluminum intake tubes in polished or black finish. more details on -

Takeda warrants their products to be free from manufacturer's defects due to workmanship and material. This warranty applies only to the original purchaser of the product and is non-transferable. Proof of purchase of the aFe product is required for all warranty claims. Warranty is valid provided aFe instructions for installation and/or cleaning were properly followed. Proper maintenance with regular inspections of product is required to insure warranty coverage. Damage due to improper installation, abuse, unauthorized repair or alteration is not warranted. Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe product is not covered under this warranty. All warranty is limited to the repair and/or replacement of the Takeda part.

  • • Direct OE Replacement Filters: Life of the vehicle
  • • Racing Filters : 1-year
  • • Universal : 2 years
  • • Air Intake Systems : 2 years
  • • Exhaust Systems : 2 years
  • • Intercoolers and Intercooler Tubes : 2 years
  • • Intake Manifolds : 2 years
  • • Exhaust Manifolds : 2 years
  • • Throttle Body Spacers : 2 years
  • • Fluid Filters : 90-days
  • • Pre-Filters : 2 years

No other warranty expressed or implied applies nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some States do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.